Hinkley-lighting YORKTOWN 3628AN User Manual
Browse online or download User Manual for Lighting Hinkley-lighting YORKTOWN 3628AN. Hinkley Lighting YORKTOWN 3628AN User Manual
- Page / 3
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
assembly instructions
Family: Yorktown Item No. 3628
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, and then
hanging the fixture from the ceiling.
start here
3628
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
NOTE: All the parts for the center column assembly are laced on the supply wire. During
assembly parts will be slipped along the wire. Caution should be used during this
process.
1. to assemble the center column, take the steel center stem (2) and thread it into
coupler (A) located on the main body assembly (1), approximately 1/2”. Then tighten
hex nut (3) against coupler to lock center stem in place - see Drawing 1.
2. Slip column (4) along wire and over center stem (2), followed by the top casting (5)
and cup (6).
3. Thread hex nut (7) down on the center stem (2) approximately 1”. It will need to be
adjusted in the next step.
4. Now slip cap (8) onto center stem (2). The outer edge should fit and rest inside cup
(6). Hex nut (7) should be adjusted so it just touches the underside of cap (8).
5. Thread hex nut (9) onto center stem (2) and tighten to secure center column assembly.
6. Slip cap (10) onto center stem (2) to cover hex nut (9).
7. To complete center column assembly slip loop (11) along wire and thread opnto top
of center tube (2) and tighten.
8. Please refer to the hanging instruction sheet (I.S. 19) provided to hang this fixture.
Then refer back to this sheet to install the glass.
Drawing 1 - Fixture Assembly
1
3
Drawing 2 - Fixture Assembly
10.15.10
1. To prepare the sockets to accept the candle sleeves, it will be necessary to lock them
in postition. To accomplish this, first tilt bulb socket and bracket (B) up in a vertical
position- see Drawing 2.
2. Slip the socket and bracket (B) down until the two tabs (C) engage the notch (D)
that is in the base socket bracket (E).
3. Tighten screw (F) to lock sockets in position. Repeat for remaining sockets.
4. Slip candle sleeves (12) over sockets (B) followed by candle chaser (13) and repeat
for remaining sockets - see Drawing 1.
2
12
4
5
6
8
7
9
A
B
10
11
13
B
F
C
D
E
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
Summary of Contents
Page 1 - Drawing 2 - Fixture Assembly
assembly instructionsFamily: Yorktown Item No. 3628 1. Find a clear area in which you can work.2. Unpack fixture and glass from carton.3. Carefu
Page 2 - I.S.19 hanging instructions
start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire thr ough chainDrawing 2 - Canop
Page 3
I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL
Related products and manuals for Lighting Hinkley-lighting YORKTOWN 3628AN
(3 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 0.557 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals