Hinkley-lighting LOLA 5774 User Manual download pdf



assembly instructions

Family: Lola Item No. 5774 BN

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst attaching the

mounting strap to the junction box, making all necessary electrical connections,

mounting backplate to mounting plate, installing glass, and then attaching

cage assembly.

start here

5774

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.



Drawing 2 - Fixture Assembly

1. Glass installation is accomplished by ﬁrst placing glass (1) into square metal holder

(G) attached to mounting plate assembly (2) - see Drawing 2.

2. Carefully lift glass (1) and mounting plate assembly (2) up and slip over socket

assembly (3) and center stem (4). Hold in position against backplate (B).

3. Thread barrel knob (5) onto center stem (4) and tighten to secure mounting plate

and glass to ﬁxture.

4. Fixture can now be lamped accordingly. Bulb should not be touched with ﬁngers, use

of a rag or cloth is recommended.

5. To complete assembly, slip bulb shield (6) over bulb and ﬁnger tighten shield onto

socket. Over tightening could make shield difﬁcult to remove for relamping.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

1. Mount the ﬁxture by sliding the back plate (B) over mounting plate (A) - see

Drawing 1.

2. Attach the back plate (B) to mounting plate (A) with screws (C).

4.26.10

Drawing 1 - Fixture Assembly

CFC

CFF

CFD

1. Remove main mounting plate (A) from ﬁxture back plate (B) by removing the four

ﬂat head screws (C) - see Drawing 1.

2. Slide the wires from the junction box, through the large center hole, making sure

curved slots (D) line up with the threaded holes in the junction box.

3. Using two 8-32 screws (E) attach the main mounting plate (A) to the junction box.

A carpenters level can be used on the folded side of mounting plate (A) to check for

plum.

4. Additional mounting holes (F) are provided on retainer plate and do to weight of

ﬁxture should be used. Use appropriate anchoring device for material to which ﬁxture

will be mounted.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Summary of Contents

Page 1 - Drawing 1 - Fixture Assembly

assembly instructionsFamily: Lola Item No. 5774 BN 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefull

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Comments to this Manuals

No comments

Hinkley-lighting LOLA 5774 User Manual

Browse online or download User Manual for Lighting Hinkley-lighting LOLA 5774. Hinkley Lighting LOLA 5774 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting LOLA 5774