Hinkley-lighting CONGRESS 3143 User Manual download pdf

assembly instructions

Item No. 3143

Drawing 2 - Fixture Mounting

Drawing 1 - Strap Detail

Drawing 3 - Glass Installation

HINK L E Y LIGHT ING 33000 Pin Oak Parkway Avon Lake, OH 4401 2 8 0 0.446.5539 / 440.653.5500 hinkleylighting.com

1. Find a clear area in which you can work.

3. Carefully review instructions prior to assembly.

from the ceiling, and then installing the glass.

star t here

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

01.01.13

1. Install screws (A) into mounting plate (B) - see Drawing 1.

Be sure the holes into which the screws are threaded mathc the spacing of the holes

2. Attach mounting plate (B) to junction box (J), using screws (G) provided and then

slip supply wires through large center hole.

Make electrical connections from supply wire to the ﬁxture lead wires. Refer to

instruction sheet (IS18) and follow all instructions to make all necessary wiring

connnections. Then refer back to this sheet to continue installation of this ﬁxture.

1. Hang the ﬁxture by slipping screws (A) through holes (C) of canopy

(D) - see Drawing 2.

2. Thread on ball knobs (E) onto end of screws (B) and tighten to secure ﬁxture

to ceiling.

1. To install glass unthread knurled (2) in bracket (1) until glass can be slipped into

place - see Drawing 3.

2. Lamp ﬁxture accordingly at this point.

3. Slip glass (3) into bracket (1) and hand tighten knurled knob (2) to secure glass.

1 2

assembly instructions Item No. 3143Drawing 2 - Fixture MountingDrawing 1 - Strap DetailDrawing 3 - Glass InstallationJBGA321HINK L E Y LIGHT IN

Page 2

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

No comments

Hinkley-lighting CONGRESS 3143 User Manual