Hinkley-lighting NEST FR41612ORB User Manual download pdf

FR41612ORB

NEST

ASSEMBLY INSTRUCTIONS

Assembly of this ﬁxture will be accomplished by ﬁrst attaching the mounting hardware

to the junction box, making all necessary wiring connections, mounting the ﬁxture to

the wall and then installing the ﬁxture glass.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Prepare mounting strap (a) by threading long mounting screws (b) into the back

of the mounting strap (a), making sure the holes into which the screws are

threaded match the spacing of holes (d) in the backplate (e) - See Drawing 1.

2 Attach mounting strap (a) to junction box (j) using two short mounting

screws (c).

3 Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

4 To mount ﬁxture, slip the two mounting screws (b) through the two mounting

holes (d) in the backplate (e).

5 While holding ﬁxture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

STEP 2

1 Prior to glass being installed, ﬁxture can now be lamped accordingly.

2 To install glass, slide glass (1) into ﬁxture from the top - see Drawing 2.

[DRAWING 1]

[DRAWING 2]

Bulbs: 75W MED. Replacement Parts: GLASS: R41612GL

a c e

6.10.09

800.421.3517 WWW.FREDRICKRAMOND.COM

FR41612ORBNEST ASSEMBLY INSTRUCTIONS Assembly of this ﬁxture will be accomplished by ﬁrst attaching the mounting hardware to the junction box, m

No comments

Hinkley-lighting NEST FR41612ORB User Manual