Hinkley-lighting FREEPORT 1802 User Manual download pdf

assembly instructions

Family: Freeport Item No. 1802 OZ

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, making all necessary electrical connections, and then

hanging the ﬁxture from the ceiling.

start here

1802

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Remove screws (2) from under roof (1). Make sure cage assembly (3) is supported

while removing screws. When last screw is removed the cage assembly can drop off

the ﬁxture - see Drawing 1.

2. Remove screws (4) that hold the glass clips (5) in place.

3. Glass (6) can now be lifted out of the cage assembly (3).

4. To replace glass, follow steps 1-3 in reverse order.

5. Please refer to the hanging instruction sheet (I.S. 20) provided to complete

installation of this ﬁxture.

Drawing 1 - Fixture Assembly

11.12.09

NOTE: remove cardboard from inside of ﬁxture before

lamping

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

assembly instructionsFamily: Freeport Item No. 1802 OZ1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Careful

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

No comments

Hinkley-lighting FREEPORT 1802 User Manual