Hinkley-lighting REEF 1954 User Manual download pdf

assembly instructions

Family: Reef Item No. 1954 HE/VZ

1954

Drawing 1 - Strap Detail

Drawing 2 - Fixture Mounting

(side view)

gull wing

bracket

backplate

Drawing 4 - Fixture Assembly

Drawing 3 - Gasket Installation

foam weather

stripping

application

location

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Prepare mounting strap (A) by threading the two 8-32 long mounting screws (B)

into the back of the gull wing bracket - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the back plate (E) - see Drawings 1 and 2.

2. Attach mounting strap (A) to junction box (J) using two 8-32 screws (C) 1” long (not

provided) - see Drawing 2.

1. Prior to installing glass, it is necessary to install foam weather stripping in the roof of

the ﬁxture - see Drawing 3.

2. Cut 3 strips approximately 1-1/2” long from the foam weather stripping provided in

the parts bag with the ﬁxture.

1. Slip the two mounting screws (B) through the two mounting holes in the backplate

(E) - see Drawing 2.

2. While holding ﬁxture in place, thread the two ball knobs (F) onto mounting screw

(B) and tighten.

1. Fixture can now be lamped accordingly.

2. The glass in this ﬁxture is installed by lining up the three grooves (3) in the glass with

the three tabs located inside the roof - see Drawing 4.

3. To install glass (2) align grooves and slip glass up into roof. Turn glass clockwise to

lock it in.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall, and then assembling the main body of the ﬁxture.

start here

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

7.6.10

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Summary of Contents

Page 1 - Drawing 4 - Fixture Assembly

assembly instructionsFamily: Reef Item No. 1954 HE/VZ 1954Drawing 1 - Strap DetailDrawing 2 - Fixture MountingB(side view)gull wingbracketbackpla

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Page 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Comments to this Manuals

No comments

Hinkley-lighting REEF 1954 User Manual

Browse online or download User Manual for Lighting Hinkley-lighting REEF 1954. Hinkley Lighting REEF 1954 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting REEF 1954