Hinkley-lighting DISTRICT 2115 User Manual download pdf

assembly instructions

Item No. 2110 / 2114 / 2115

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall, and then lamping the ﬁxture.

start here

2110

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 2 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

Drawing 1 - Fixture Mounting

B C D

E F

1. Prepare mounting strap (A) by threading the two long mounting screws (B)

into the back of the mounting strap (A) - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the backplate (E).

2. Attach mounting strap (A) to junction box (J) using two screws (C).

1. To mount ﬁxture, slip the two mounting screws (B) through the two mounting holes

(D) in the backplate (E) - see Drawing 1.

2. While holding ﬁxture in place, thread the two terminal nut (F) on to the end of the

mounting screws (B), and tighten.

01.01.13

2114

2115

1. To prepare ﬁxture for mounting, ﬁrst remove top plate (2) from main body (1), by

removing screws (3) - see Drawing 1.

2. Slip glass (4) out of ﬁxture by pulling genlty upwards. Set glass (4), top plate (2),

and screws (3) aside for use later.

3. Fixture can be mounted to wall at this time. Please procede to step 3 for mounting

instructions.

4. After ﬁxture is mounted, it can be lamped accordingly and ﬁxture can be assembled

by following steps 1 thru 3, in reverese order.

H I N K L E Y L I G H T I N G 33 00 0 Pin Oak Parkw ay Avon Lake, OH 4 40 12 800.446.5539 / 440.653.5500 h in kleylighti ng.com

1 2 3

Summary of Contents

Page 1 - Item No. 2110 / 2114 / 2115

assembly instructions Item No. 2110 / 2114 / 21151. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully review

Page 2

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Page 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Comments to this Manuals

No comments

Hinkley-lighting DISTRICT 2115 User Manual

Browse online or download User Manual for Lighting Hinkley-lighting DISTRICT 2115. Hinkley Lighting DISTRICT 2115 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting DISTRICT 2115