Hinkley-lighting FLOURISH 3284SL User Manual

Browse online or download User Manual for Lighting Hinkley-lighting FLOURISH 3284SL. Hinkley Lighting FLOURISH 3284SL User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
- 1 -
____Assembly Instructions____
Item No. 3284
start here
1. Find a clear area in which you can work.
2. Unpack Fixture and glass from carton.
3. Carefully Review Instructions Prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
stems to the main body, attaching the mounting strap to the junction box,
making all necessary electrical connections, hanging the fixture from the
ceiling, installing the shade, and then installing the glass lens.
Drawing 2 – Glass Installation
SAFETY WARNING: READ WIRING AND GROUNDING
INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS.
TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW
WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR
LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Before installing Glass, the fixture can be lamped accordingly -see Drawing 2.
2. Slide nipple (3) through tube (2) and thread into wire body.
3. Slide the shade (11) into place and screw knobs (12) into crossbar (13)
4. Slide check ring (4) onto nipple followed by one flat steel washer (5), then
one rubber washer (6), glass (7), then again with the remaining rubber washer
(6), the remaining flat steel washer (5), and thread on the Hex nut ( 8).
5. Slide on decorative cover (9) followed by the decorative kn
ob (10).
Drawing 1 – Mounting Detail
1. Determine the desired height the chandelier will be installed at.
2. The fixture is supplied with a variety of stem lengths. Determine what combination
of stems are needed to achieve desired length - see Drawing 1.
3. Slip stems over wire and thread first stem onto top of chandelier. Repeat this process
until all required stems are threaded together.
4. Slip wire through center of canopy swivel and thread onto stem assembly.
stem
wire
wire
wire
stem
Drawing 1 – Stem Installation
3284
01.01.13
1. Fixture is ready for installation. Please follow instruction sheet (IS19-93) to
continue assembly.
2. Return to this section of the instruction sheet for shade and glass installation.
Page view 0
1 2 3

Summary of Contents

Page 1 - ____Assembly Instructions____

- 1 -____Assembly Instructions____Item No. 3284start here1. Find a clear area in which you can work.2. Unpack Fixture and glass from carton. 3.

Page 2 - I.S. 19-93

HINKLEY L IGHTI N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com1. Shut off electrical current be

Page 3

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Comments to this Manuals

No comments