Hinkley-lighting OXFORD 1245MN User Manual download pdf

assembly instructions

Family: Oxford Item No. 1245 MN

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Prepare mounting strap (A) by threading the two 8-32 long mounting screws (B)

into the back of the gull wing bracket - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the back plate (E) - see Drawings 1 and 2.

2. Attach mounting strap (A) to junction box (J) using two 8-32 screws (C) 1” long (not

provided) - see Drawing 2.

1. To attach ﬁxture to wall, slip the two mounting screws (B) through the two mount-

ing holes in the backplate (E) - see Drawing 2.

2. While holding ﬁxture in place, thread the two ball knobs (F) onto mounting screw

(B) and tighten.

1. To install glass, slip candle sleeve (2) over sockets (7) - see Drawing 3.

3. Fixture can now be lamped.

4. Thread center stem (3) into bottom of cluster assembly (8) and tighten.

5. Slip glass (4) onto ﬁxture and hold in place.

6. Slip bottom cap (5) onto center stem (3) and up against glass (4) and hold in place.

7. Thread loop (6) onto end of center stem (3) and tighten. Hand tighten only.

Note: Using a tool to tighten may cause damage to glass.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall, and then installing the glass.

start here

1245

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 1245 ﬁxture is 40 watts per bulb.

Drawing 1 - Strap Detail

Drawing 2 - Fixture Mounting

(side view)

gull wing

bracket

Drawing 3 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

back plate

2.7.08

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Summary of Contents

Page 1 - Drawing 3 - Fixture Assembly

assembly instructionsFamily: Oxford Item No. 1245 MN1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefull

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Page 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Comments to this Manuals

No comments

Hinkley-lighting OXFORD 1245MN User Manual

Browse online or download User Manual for Lighting Hinkley-lighting OXFORD 1245MN. Hinkley Lighting OXFORD 1245MN User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting OXFORD 1245MN