Hinkley-lighting SAN SIMEON FR59193SLF User Manual download pdf

FR59193SLF

SAN SIMEON

ASSEMBLY INSTRUCTIONS

Assembly of this ﬁxture will be accomplished by ﬁrst installing the mounting strap to

the junction box, making all necessary electrical connections, mounting the ﬁxture to

the wall and then installing the ﬁxture glass.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Prepare mounting strap (a) by threading the two longest mounting screws (b)

into the back of the mounting strap (a), making sure the holes into which the

screws are threaded match the spacing of holes (d) in the backplate (e) - See

Drawing 1.

2 Attach mounting strap (a) to junction box (j) using two screws (c).

3 Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

4 To mount ﬁxture, slip the two mounting screws (b) through the two mounting

holes (d) in the backplate (e).

5 While holding ﬁxture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

STEP 2

1 Slip glass (2) over socket (1) - See Drawing 2.

2 Thread socket ring (3) over socket (1) to secure glass.

3 Fixture can now be lamped accordingly.

[DRAWING 1]

[DRAWING 2]

Bulbs: 100W MED. Replacement Parts: GLASS: FR49190gl

a c e

2.2.09

800.421.3517 WWW.FREDRICKRAMOND.COM

FR59193SLFSAN SIMEON ASSEMBLY INSTRUCTIONS Assembly of this ﬁxture will be accomplished by ﬁrst installing the mounting strap to the junction bo

No comments

Hinkley-lighting SAN SIMEON FR59193SLF User Manual