Hinkley-lighting JULES 53240 User Manual

Browse online or download User Manual for Lighting Hinkley-lighting JULES 53240. Hinkley Lighting JULES 53240 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
HINKLEY LIGHTING 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 www.hinkleylighting.com
assembly instructions
Item No. 53240
1. Find a clear area in which you can work.
2. Unpack xture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this xture will be accomplished by rst mounting the
mounting strap to the junction box, making all necessary electrical connections, assem-
bling the main body of the xture, mounting the xture to the wall,
and then installing the glass.
start here
53240
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 2 - Glass Installation
Make electrical connections from supply wire to xture lead wires. Refer to instruction sheet (I.S.
18) and follow all instructions to make all necessary wiring connections. Then refer back to this
sheet to continue installation of this xture.
5
1. Remove main mounting plate (A) from xture back plate (B) by removing the at head screws
(C) - see Drawing 1.
2. Slide the wires from the junction box, through the large center hole, making sure curved slots
(D) line up with the threaded holes (E) in the junction box.
3. Using two 8-32 screws (F) attach the main mounting plate (A) to the junction box, making sure
side of mounting plate (A) is plume.
1. Mount the xture by sliding the back plate (B) over mounting plate (A) - see Drawing 1.
2. Attach the back plate (B) to the mounting plate (A) using the screws (C).
6.1.12
1. To complete assembly, remove decorative grill (1) from the backplate (2) by removing screws
(3) at the top and bottom. Set parts in a safe place - See Drawing 2.
2. To install glass (4) remove threaded socket ring (5) and spacer (6) from socket (S)
3. Slip glass (4) over socket (S), followed by spacer (6), then thread on socket ring (5) to secure
glass.
4. Fixture can be lamped accordingly at this time.
5. Replace decorative grill (1) onto backplate (2) with screws (3) removed earlier.
6. Fixture is complete and power can be restored.
A
B
C
D
E
F
Drawing 1 - Fixture Mounting
1
3
2
4
6
5
S
3
Page view 0
1 2

Summary of Contents

Page 1 - Item No. 53240

HINKLEY LIGHTING 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 www.hinkleylighting.comassembly instructions Item No. 532401. F

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Comments to this Manuals

No comments