Hinkley-lighting LATITUDE 5650 User Manual download pdf

assembly instructions

Family: Latitude Item No. 5650

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

assembling the main body of the ﬁxture, mounting the ﬁxture to the wall,

and then installing the glass.

start here

5650

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 5650 ﬁxture is 60 watts G-9 per bulb.

Drawing 2 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

1. Remove main mounting plate (A) from ﬁxture back plate (B) by removing the ﬂat

head screws (C) - see Drawing 1.

2. Slide the wires from the junction box, through the large center hole, making sure

curved slots (D) line up with the threaded holes (E) in the junction box and tabs on

mounting brakect are perendicular to sides of junction box.

3. Using two 8-32 screws (F) attach the main mounting plate (A) to the junction box,

making sure side of mounting plate (A) is square to ceiling.

1. Mount the ﬁxture by sliding the back plate (B) over mounting plate (A) - see

Drawing 1.

2. Attach the back plate (B) to the mounting plate (A) using the screws (C).

6.1.11

1. Fixture can be lamped accordingly prior to installing the glass.

2. After installing the lamp thread bulb shield (1) onto socket (2).

3. To install glass (3) slide panel between uprights (4) with etched side facing toward

the bulb. Optional padding material is provided and can be cut to size and placed at

base of uprights (P) were the glass rest.

Drawing 1 - Fixture Mounting

HINKLEY LIGHTING 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Drawing 1 - Fixture Mounting 1

Summary of Contents

Page 1 - Drawing 1 - Fixture Mounting

assembly instructionsFamily: Latitude Item No. 5650 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Caref

Page 2

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Comments to this Manuals

No comments

Hinkley-lighting LATITUDE 5650 User Manual

Browse online or download User Manual for Lighting Hinkley-lighting LATITUDE 5650. Hinkley Lighting LATITUDE 5650 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting LATITUDE 5650