Hinkley-lighting JASPER FR40200IRN User Manual download pdf

FR440200IRN

JASPER

ASSEMBLY INSTRUCTIONS

Assembly of this ﬁxture will be accomplished by ﬁrst assembling the main body,

installing the mounting hardware to the junction box, making all necessary electrical

connections,mounting backplate to the wall and then installing the ﬁxture shade and

crystals.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Prepare mounting strap (a) by threading nipple (c) into the center hole of

the mounting strap (a), approximately 1/4“- see Drawing 1.

2 Attach mounting strap (a) to junction box (j) using two screws (b) provided.

STEP 2 Make electrical connections from supply wire to ﬁxture lead wires.

Refer to instruction sheet (I.S. 18) and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of this ﬁxture.

STEP 3

1 To mount backplate to wall, slip center hole of backplate (e) over nipple (c) and

hold ﬁxture in position - see Drawing 1.

2 Thread decorative knob (d) onto end of nipple (c) and tighten to secure ﬁxture.

3 Fixture can now be lamped accordingly.

STEP 4

1 Place glass cylinder (1) over socket and bulb and slip it into glass holder (2).

[DRAWING 2]

Bulbs: 60W CAND. Replacement Parts: GLASS: R40200GL

10.15.10

[DRAWING 1]

FR440200IRNJASPER ASSEMBLY INSTRUCTIONS Assembly of this ﬁxture will be accomplished by ﬁrst assembling the main body, installing the mounting h

No comments

Hinkley-lighting JASPER FR40200IRN User Manual