Hinkley-lighting VALLEY 4704VK User Manual download pdf

assembly instructions

Family: Valley Item No. 4704 VK/BN

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, installing the ﬁxture glass, making all necessary

electrical connections, and then hanging the ﬁxture.

start here

4704

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. To assemble main body, spread arms (A) of top body frame (1) until they are 120

degrees apart.

2. Attach bulb shield (2) to top of socket assembly (B), using ball knob screws (3).

3. Thread center stem (4) into coupler (C), located in the center of the socket assembly,

approximately 3/8”.

4. Thread hex nut (D) up against coupler (C), to lock center stem (4) in place.

5. Thread hex nut (5) onto center stem approximately 1 1/4”.

6. Slip steel washer (6) onto center stem (4) and up against hex nut (5).

7. Slip rubber washer (7) onto center stem (4) and up against steel washer (6).

8. Fixture can now be lamped accordingly.

9. Slip glass (8) onto center stem (4) and hold in position.

10. Thread knurl nut (9) onto center stem (4) and tighten up against glass (8).

Note: hand tighten only, using a tool may cause damage to glass.

11. Slip spider assembly (10) over glass (8).

12. Line up the holes in the bottom arms (A) with the hole in tab (E) and thread in ball

knob screw (11) through hole and tighten to secure.

13. Repeat step 12 with remaining arms.

14. Thread ﬁnial (12) onto end of center stem (4).

15. Please refer to the hanging instruction sheet (I.S. 19) provided to hang ﬁxture.

Drawing 1 - Fixture Assembly

2.7.08

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Summary of Contents

Page 1 - Drawing 1 - Fixture Assembly

assembly instructionsFamily: Valley Item No. 4704 VK/BN 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Ca

Page 2 - I.S.19 hanging instructions

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy

Page 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Related models: VALLEY 4704BN

Comments to this Manuals

No comments

Hinkley-lighting VALLEY 4704VK User Manual

Browse online or download User Manual for Lighting Hinkley-lighting VALLEY 4704VK. Hinkley Lighting VALLEY 4704VK User Manual

Summary of Contents

Related models: VALLEY 4704BN

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting VALLEY 4704VK