Hinkley-lighting PLYMOUTH 4244OB User Manual download pdf

assembly instructions

Family: Plymouth Item No. 4244 OB

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Slip top cap (1) with loop attached, along wire and thread onto top of wiring

compartment (2) - see Drawing 1.

2. Fold out arms (3) until they are equally spaced 120 degrees apart.

3. Using the 4 ball knobs and stud screws (4) provided, attach the 2 white perforated

bulb shields (5) to the shield bracket (E).

4. Thread stem (6) into coupler (A), located in the center of the socket cluster (B),

approximately 1/4”.

5. Using a 9/16” wrench, tighten hex nut (C) against coupler (A) to lock stem (6) in place.

6. Adjust hex nut (D) on stem (6) until it is approximately 2 3/4” from the bottom

of the stem.

7. Please refer to the hanging instruction sheet (I.S. 19) provided to continue

installation of this ﬁxture. Refer back to this sheet for glass installation instructions below.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, hanging the ﬁxture from the ceiling, and then

installing the glass.

start here

4244

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 1 - Fixture Assembly

wire

1. Slip steel ﬂat washer (7) onto stem (6) - see Drawing 1.

2. Slip rubber washer (8) onto stem (6).

3. Slip glass (9) onto stem (6) and hold in position.

5. Thread hex nut (12) onto stem (6) and cautiously tighten up against glass (9).

Over tightening of parts could cause glass damage.

6. Thread ﬁnial (15) onto end of center stem (6) and tighten to secure parts.

2.7.08

4. Hold glass (9) in position and slip rubber washer (10) onto stem (6) followed by

ﬂat washer (11). Hold pieces in place.

6. Slip bottom cap (13) followed by ball knob (14) onto center stem (6) and hold in

place

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Summary of Contents

Page 1 - Drawing 1 - Fixture Assembly

assembly instructionsFamily: Plymouth Item No. 4244 OB 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Care

Page 2 - I.S.19 hanging instructions

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy

Page 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Comments to this Manuals

No comments

Hinkley-lighting PLYMOUTH 4244OB User Manual

Browse online or download User Manual for Lighting Hinkley-lighting PLYMOUTH 4244OB. Hinkley Lighting PLYMOUTH 4244OB User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting PLYMOUTH 4244OB