Hinkley-lighting PLANTATION 5317BB User Manual download pdf



assembly instructions

Family: Plantation Item No. 5317 CB/BB/PL

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst determining

the length of stem required, mounting the mounting strap to the junction box,

making all necessary elctrical connections, hanging the ﬁxture from the ceiling,

and then installing the glass.

start here

5317



SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Determine the overall length you will need the assembled ﬁxture to be.

2. Determine what stems will be needed to achieve the overall length you require.

(Additional stems are available and can be ordered. Ask your local Hinkley Lighting

representative or visit www.hinkleylighting.com for information.)

3. Install stems by slipping them onto the supply wire of the ﬁxture, threaded end up,

and threading them together.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

1. Prepare gem strap (A) for mounting by threading two screws (B) provided into

back of gull wing bracket of gem strap (A) - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the canopy (E) - see Drawings 1 and 2.

3. Mount gem strap (A) to junction box (J), using the two 1” screws (C) provided.

1. Hang the ﬁxture by slipping the holes (D) in the canopy, over the screws (B) in the

mounting strap - see Drawing 2.

2. Thread on ball knobs (F) to secure ﬁxture to the ceiling.

1. Remove socket ring (3) from socket (1) - see Drawing 3.

2. Slip glass (2) over socket (1) and thread socket ring (3) back on to socket (1) to secure.

Drawing 2 - Fixture Mounting

Drawing 1 - Strap Detail

(side view)

gull wing

bracket

Drawing 3 - Glass Installation

2.7.08

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Summary of Contents

Page 1 - Drawing 1 - Strap Detail

assembly instructionsFamily: Plantation Item No. 5317 CB/BB/PL 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Comments to this Manuals

No comments

Hinkley-lighting PLANTATION 5317BB User Manual

Browse online or download User Manual for Lighting Hinkley-lighting PLANTATION 5317BB. Hinkley Lighting PLANTATION 5317BB User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting PLANTATION 5317BB