Hinkley-lighting PLANTATION 4887BB User Manual download pdf

assembly instructions

Family: Plantation Item No. 4887 BB/PZ

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, making all necessary electrical connections, hanging

the ﬁxture from the ceiling, and then installing the ﬁxture glass.

start here

4887

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Slip top crown (2) along wire and thread into top of main body assembly (1) - see

Drawing 1.

2. Spread arms (A) of the ﬁxture until they are equally spaced apart and located in

between the uprights (B).

3. Please refer to the hanging instruction sheet (I.S. 19-50) provided to continue

installation of this ﬁxture. Then refer back to this sheet to install glass.

1. To install glass, slip candle sleeve (4) over socket (C) - see Drawing 2.

2. Slip harp (5) onto top of candle sleeve (4).

3. Attach shade (6) on the top of harp (5).

4. Thread ﬁnial (7) into top of harp (5) and tighten.

5. To assemble center glass (8), take top crown assembly (9) and thread into coupler (D).

6. Attach center glass (8) to center bobesche (E) by threading in stud screws (10).

Note: DO NOT use tools to tighten stud screws (10). Over tightening may cause glass damage.

Drawing 1 - Fixture Assembly

Drawing 2 - Glass Installation

5.30.08

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

assembly instructionsFamily: Plantation Item No. 4887 BB/PZ 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3

Related models: PLANTATION 4887PZ

No comments