Hinkley-lighting NOVA 50104 User Manual
Browse online or download User Manual for Lighting Hinkley-lighting NOVA 50104. Hinkley Lighting NOVA 50104 User Manual
- Page / 2
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1
2
3
R
assembly instructions
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall, and then installing the glass.
start here
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 2 - Fixture Assembly
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
5
1. Remove main mounting plate (A) from fixture back plate (B) by removing the four
flat head screws (C) - see Drawing 1.
2. Slide the wires from the junction box, through the large center hole, making sure
curved slots (D) line up with the threaded holes (E) in the junction box.
3. Using two 8-32 screws (F) attach the main mounting plate (A) to the junction box,
making sure side of mounting plate (A) is square to ceiling.
1. Mount the fixture by sliding the back plate (B) over mounting plate (A) - see
Drawing 1.
2. Attach the back plate (B) to the mounting plate (A) using the screws (C).
06.01.13
Drawing 1 - Fixture Mounting
A
B
C
D
E
F
C
wall
anchor
anchor
screw
G
4. Additional wall anchors supplied can be installed at keyhole points
(G)
.
HINK L E Y LIGHT ING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting . c o m
1. To attach glass to fixture, first slip small hole in glass (2) over socket (1),
making sure it rest in ring (R).
2. Now slip socket spacer (3) through larger hole in glass and over socket (1).
Hold glass in position.
3. Lamp fixture accordingly at this time.
4. Finally thread glass bulb shield (4) onto socket (1) and hand tighten to secure
glass (2), repeat process for remaining pieces of glass.
Item No. 50102 / 50103 / 50104
50103
50102
50104
4
1
2
Summary of Contents
Page 1 - Drawing 1 - Fixture Mounting
123Rassembly instructions1. Find a clear area in which you can work.2. Unpack fixture and glass from carton.3. Carefully review instructions prior to a
Page 2
HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr
Related products and manuals for Lighting Hinkley-lighting NOVA 50104
(2 pages)© 2020, manymanuals.com. All rights reserved. | 2.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals