assembly instructions
Family: Freeport Item No. 1801 OZ
1. Find a clear area in which you can work.
2. Unpack xture and glass from carton.
3. Carefully review instructions prior to assembly.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
*** The construction of this xture will be accomplished by rst assembling the
main body of the xture, making all necessary electrical connections, mounting
the xture to pre-installed post, and then installing the glass.
start here
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Mounting
1801
C
B
Make electrical connections from supply wire to xture lead wires. Refer to instruction
sheet 18 (I.S. 18) and follow instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this xture.
1. After wiring connections are complete, slip post tter (A) over top of pre-installed
post (B) making sure all wire connections are tucked inside the pole - see Drawing 1 .
2. When xture is slipped over pole make sure no wires are being pinched between the
top edge of the pole and the inside of the post tter.
3. Thread the 3 set screws (C) into pre-tapped holes in post tter.
4. Tighten screw (C) to secure xture to post.
11.12.09
1
3
4
5
2
6
1. Remove screws (2) from under roof (1). Make sure cage assembly (3) is supported
while removing screws. When last screw is removed the cage assembly can drop o
the xture - see Drawing 1.
2. Remove screws (4) that hold the glass clips (5) in place.
3. Glass (6) can now be lifted out of the cage assembly (3) .
4.
To replace glass, follow steps 1-3 in reverse order.
8
7
5. The roof nial (7) is mounted inside the roof to save space. It will be necessary to remove nut
(8) remove nial and placei nial (6) in the correct position. Then thread nut (8) onto nial (7) and
tighten.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
Comments to this Manuals