Hinkley-lighting DRAKE 1995 User Manual
Browse online or download User Manual for Lighting Hinkley-lighting DRAKE 1995. Hinkley Lighting DRAKE 1995 User Manual
- Page / 3
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
assembly instructions
Family: Drake Item No. 1990 / 1994 / 1995
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. To lamp fixture insert bulb through the open bottom and thread into socket.
2. To replace a glass panel (5), remove screw (1) located under the roof lip. Hold cage in
positioin when removing screws. After screws are removed the fixture cage (2) can be
removed.
3. Remove screw (3) holding the glass clip (4) in place.
4. Remove broken glass and slip new piece into place. Making sure bottom of glass fits
behind the tabs located in the bottom of the cage.
5. Replace glass clip (4) and thread screw (3) back into place to secure glass.
6. Replace cage (2) and secure with screws (1) removed earlier.
.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall, and then lamping the fixture.
start here
1990
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
Drawing 1 - Fixture Mounting
A
J
B C D
E
F
1. Prepare mounting strap (A) by threading the two long mounting screws (B)
into the back of the mounting strap (A) - see Drawing 1.
• Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the backplate (E).
2. Attach mounting strap (A) to junction box (J) using two 1-1/4” screws (C).
1. To mount fixture, slip the two mounting screws (B) through the two mounting holes
(D) in the backplate (E) - see Drawing 1.
2. While holding fixture in place, thread the two ball knobs (F) on to the end of the
mounting screws (B), and tighten.
5
06.01.13
1994
Drawing 2 - Glass Replacement
1995
1
2
3
4
5
H I N KLEY LIGHTI N G 33000 Pin Oak Parkway, Avon Lake, OH 4401 2 8 00 .446 .5 53 9 / 4 40.6 53 .5500 h inkl eylig ht ing.com
Summary of Contents
Page 1 - Drawing 2 - Glass Replacement
assembly instructionsFamily: Drake Item No. 1990 / 1994 / 19951. Find a clear area in which you can work.2. Unpack fixture and glass from carton.3
Page 2
HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr
Page 3 - I.S.200 caulking instructions
start hereDrawing 1 I.S.200 caulking instructionsI.S. 2008.12.10caulking gun1. After securing fixture to the wall it is recommended that the gap betwe
Related products and manuals for Lighting Hinkley-lighting DRAKE 1995
(2 pages)© 2020, manymanuals.com. All rights reserved. | 0.938 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals