Hinkley-lighting AURORA 2280MT User Manual download pdf

assembly instructions

Family: Aurora Item No. 2280 MT

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Prepare mounting strap (A) by threading the two 1 1/4” long mounting screws (B)

into the back of the gull wing bracket - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the back plate (E) - see Drawings 1 and 2.

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided - see

Drawing 2.

1. To install glass, unscrew top ﬁnial (1) from nipple (2) - see Drawing 3.

2. Slip cap (3) off nipple (2).

3. Unscrew ball knobs (4) off studs (5).

4. Remove harp (6) from cage (7).

5. Unthread socket ring (8) from socket (9).

6. Slip glass (10) over socket (9) and thread socket ring (8) back onto socket (9).

7. Fixture can be lamped accordingly.

8. To reassemble ﬁxture, follow steps 1-4 in reverse order.

*** The construction of this ﬁxture will be accomplished by ﬁrst installing the

ﬁxture glass, mounting the mounting strap to the junction box, making all neces-

sary electrical connections, and then mounting the ﬁxture to the wall.

start here

2280

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 1 - Strap Detail

Drawing 2 - Fixture Mounting

(side view)

gull wing

bracket

backplate

Drawing 3 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

1. Slip the two mounting screws (B) through the two mounting holes (D) in the

backplate (E) - see Drawing 2.

2. While holding ﬁxture in place, thread the two ball knobs (F) onto mounting screw

(B) and tighten.

2.7.08

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Summary of Contents

Page 1 - Drawing 3 - Fixture Assembly

assembly instructionsFamily: Aurora Item No. 2280 MT 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefu

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Page 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Comments to this Manuals

No comments

Hinkley-lighting AURORA 2280MT User Manual

Browse online or download User Manual for Lighting Hinkley-lighting AURORA 2280MT. Hinkley Lighting AURORA 2280MT User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hinkley-lighting AURORA 2280MT